if your sink drain is clogged and you’vealready tried plunging it, which everybody knows how to do, you’re probably going toneed to go a little further and snake out the drain line. i know this freaks out a lotof people, but it’s really nothing to be afraid of. it’s a little messy, but it’snot too bad if you have a bucket and take the proper precautions.
so what you wantto do obviously is clear the area under the
how much does a drain snake cost, p-trap, that’s what we call this. by theway, this is what most often corrodes when you use drain cleaners over a period of time.if you have a chronically clogged drain and you use a lot of the drain cleaners, they’revery corrosive, and they will settle down in here and corrode the metal. a lot of theseare metal- they’re using a lot of pvc now.
but this is very easy to replace, and i’llalso be showing you how to do that in this.
so what you want to do is set a bucketunder the p-trap and take your channel lock pliers and simply loosen the nuts that holdit in place. once you loosen it they come apart with justyour hand.
and this is a good place to check, first of all to make sure it’s clearbecause your clog may be here and maybe it wasn’t dislodged by the plunger. once youdetermined that the problem is not in here, then you’ll want to take your snake whichis a very useful device. you can either get the kind that attaches to a drill like mine,but you don’t have to. as long as it’s probably fifteen, twenty feet long.
now,what you’ll do is snake it up into the sewer
line and extend it out until you run intosome resistance. and then once you find the
clog, you’re going to tighten this nut andyou’re going to turn this around until it loosens it. and you have to do a lot of backand forth action here. something like that. but, eventually you’ll find the clog andyou’ll loosen it. and everything in reverse to reassemble.
